Homepage | Set Home | Add to Favorites

Taizhou Yangchun Electric Motor Co.,Ltd

  • No Category

Friends links

Multi-stage Deep Well Submersible Pump 1.25 φ98mm 115/230V 1/2-1hp
Click image to view full size image
Product: Views:210Multi-stage Deep Well Submersible Pump 1.25 φ98mm 115/230V 1/2-1hp 
Unit price: Negotiable
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2017-09-08 21:13
Multi-stage Deep Well Submersible Pump 1.25 φ98mm 115/230V 1/2-1hp

100QJD-N  Submersible pump for deep well

MYHOME FOVOL Pump Industry 100QJD2N Multi-stage Flow of Water-Cooling Deep Well Submersible Pump Capacitor built-in High Lift 1.25" φ98mm 115/230V 1/2-1hp

Product Introduction

100QJD is equipped with multi-stage submersible pump, water-cooling cooper movement, multi-stage durable centrifugal impeller and radial direction guide vane structure. Single mechanical seal and double mechanical seal from Italy are applied and O shape rubber sealing ring is applied at fixed spigot for static seal.

Product Features

Improved motor: higher power, water cooling motor, lower temperature rising, larger flow.

Improved impeller: high temperature resistance impeller ensures long term operation of the pump.

Low water level operation is available if the water comes into the bottom section, minimum diving depth 112mm.

Stainless parts and stainless intensified cover ensures cleanness of water source 

Pump/Motor Configuration

Water outlet segment embedded with thread part, 304 stainless fabricated axle   

Stainless intensified pump cover(202)  

Pump size3-7/8 ” (98mm) diameter            

Engineering plastics nylon seat, effectively reduces friction of sand to impeller

polyester fiber impeller, stainless wearing ring

Cooper motor winding

Automatic lubricating motor bearing with longer service life

Internal over-temperature protection device

Insulation grade: F

Operation Condition

Highest liquid temperature no more than 40℃

Largest media particle no bigger than 0.02%

PH value of media shall be around 6.5-8.5.

Maximum diving depth 100 meter, no less than 5mm

Power source frequency 50Hz, single phase alternating current 220V, voltage fluctuation ranges ±10% of rated value. 

Model Instruction

Product Structure

1.Outlet  2.Cable 3.Pan head screws 4.Cable platen 5.Crimp cap 6.Stainless steel tube

7.Wave pad 8.Inner wall of the base 9.Upper bearing seat 10.Stator 11.Under bearing

12.Machinery Seal 13.Oil chamber 14.Seal ring 15.Machinery Seal 16.Cylinder head

17.SHCS 18.Seal ring 19.Guide leaf 20.impeller 21.Cover plate 22.Polyestergasket 

23.Connector 24.Pump seat 25.Rubber bearings 26.Elastic ring 27.Self-tapping screws

28.Grille 29.Shaft ring 30.Flat Washers 31.Seal ring 32.Rotor shaft 33.Deep groove bearing

34.Insulation ring 35.Pan head screws 36.Capacitor box 37.Capacitor 38.Seal ring 39.Valve plug 40.Seal ring 41.Seal ring

Technical Parameters